[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Submit :: Contact Us ::
:: Volume 9, Issue 1 (Spring 2019) ::
J Fasa Univ Med Sci 2019, 9(1): 1324-1334 Back to browse issues page
Fabrication of High Frequency Electromagnetic Waves Absorber Sheets by Use of Iron Oxide Nanostructures
Mostafa Arjomandi lari1 , Saeed Parhoodeh 2, Ali Rohani sarvestani3 , Ghader Alahverdi4
1- Department of electrical engineering, Dariun branch, Islamic Azad university, Dariun, Iran
2- Islamic Azad University Shiraz Branch , saeed.parhoodeh@gmail.com
3- Islamic Azad University Shiraz Branch
4- Fasa University of Medical Sciences
Abstract:   (1949 Views)
 Background & Objective: The necessity of using wireless communications and the use of electromagnetic waves in today's world is obvious to everyone. Using of these equipment and development of them, although have many benefits but causes some anxiety on the way in which they influence on environment. One of the most effective ways of decreasing the unwanted effects of these waves is using of the absorber coatings of these waves.
Materials & Methods: First, iron chloride powder was added to the aqueous solution of poly vinyl alcohol. Then, aqueous solution of sodium hydroxide was added to it. Subsequently, the iron oxide nanostructures that appeared in the bottom of the dish as sediment were collected by using filter paper and then washed several times with deionised water and ethanol. From the synthesized materials, sheets of thickness of 0.5 and 1 mm were made.
Results: X-ray diffraction results proved the synthesis of iron oxide (Fe3O4). The analysis also showed that the synthesized nanostructures have a cubic structure and the average size of crystallites is 12 nm. The electron microscopy images showed that the nanostructures have a sheet-like shapes and their thickness are about 30 nm. The results of the absorption of electromagnetic waves in the range of 8 to 18 GHz showed that iron oxide nanostructures can absorb microwave waves in this range, which absorption increases in greater thicknesses.
Conclusion: Coatings containing iron oxide nanostructures can act as microwave absorber and they could have an effective role in eliminating or reducing the unwanted effects of electromagnetic waves.

Keywords: Waves, Microwave, Absorber, Iron Oxide, Nanostructures, Nanotechnology, Biological effects
Full-Text [PDF 1354 kb]   (2597 Downloads)    
Type of Study: Research | Subject: Medical Physics
Received: 2019/04/7 | Accepted: 2019/06/2 | Published: 2019/07/2
Send email to the article author

Add your comments about this article
Your username or Email:


XML   Persian Abstract   Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

arjomandi lari M, parhoodeh S, rohani sarvestani A, alahverdi G. Fabrication of High Frequency Electromagnetic Waves Absorber Sheets by Use of Iron Oxide Nanostructures. J Fasa Univ Med Sci. 2019; 9 (1) :1324-1334
URL: http://jabs.fums.ac.ir/article-1-1994-en.html

Volume 9, Issue 1 (Spring 2019) Back to browse issues page
Journal of Fasa University of Medical Sciences
Persian site map - English site map - Created in 0.05 seconds with 30 queries by YEKTAWEB 4319